Hi guys
Would replacing the rover 1.75" su carbs for jaguar 2" su carbs give the engine better mpg.
SU carb conversion ?
Moderator: phpBB2 - Administrators
-
- Newbie
- Posts: 6
- Joined: Sat Nov 10, 2012 11:11 pm
- Location: Manchester
I did that mod, to get more top end power from a 4.6.
The carbs are a bit of a pig:
1. They are both the same 'hand', so you have to bugger about with the linkages a fair bit!
2. There is no choke mechanism
3. The float bowls hit the rocker covers, so you have to tilt the carbs a bit, then tilt the float bowls back to level.
4. You need to port the manifold.
5. You need to modify the inlets.
Have a look partway down here:
http://www.cowdery.org.uk/v8rebuild-08.php
Chris.
The carbs are a bit of a pig:
1. They are both the same 'hand', so you have to bugger about with the linkages a fair bit!
2. There is no choke mechanism
3. The float bowls hit the rocker covers, so you have to tilt the carbs a bit, then tilt the float bowls back to level.
4. You need to port the manifold.
5. You need to modify the inlets.
Have a look partway down here:
http://www.cowdery.org.uk/v8rebuild-08.php
Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8