EFI fuel lines

sowat · Post by **sowat** » Tue May 03, 2011 9:29 pm

I've got as far as the fuel side on my Hotwire convertion
Running a Range Rover in tank pump, and TIG welded a hose tail to the fuel rail ( to put it on the near side).
What lines/hose/pipes are being used out there ?

ChrisJC · Post by **ChrisJC** » Wed May 04, 2011 6:54 am

If you mean between tank & fuel rail, I've always just used fuel injection hose, I forget which size, but it's readily available by the meter.

Chris.

SuperV8 · Post by **SuperV8** » Wed May 04, 2011 11:28 am

I'm using high pressure rubber (EPDM) fuel injection hose. 8mm ID. from pump to fuel rail.

Tom.

Ian Anderson · Post by **Ian Anderson** » Wed May 04, 2011 4:18 pm

Ditto

8mm for everything including the return

I'd also say stay away from braided as it can perish the rubber underneath and you don't notice until you get a flood!

With the fuel mixes not all fuel hose only has a life span of about 4 years

Ian