ENGINE STANDS

bclancy · Post by **bclancy** » Fri Apr 09, 2010 1:33 pm

Hi

Just looking on e-bay at engine stands as I'm finaly getting close to assembling the new engine. Just wondered if anyone has one of the sealy stands and what model/size? I just want a basic (read cheap

) but dont want to get one thats too small to fit my RV8!

Any part numbers or examples would be great!

Thanks

Brian

Alley Kat · Post by **Alley Kat** » Fri Apr 09, 2010 1:39 pm

Hi Brian
I got a cheapie Machine Mart one, the u-shape base type, figured that would be more stable than the "t" shaped ones. Had a fat old Chevy hanging off it no problems.

kiwicar · Post by **kiwicar** » Fri Apr 09, 2010 2:25 pm

I've got a really cheep T shaped base one with a big fat SBC on it (machine mart from what I remember), it is fine provided you try and get the block centre of gravity aligned with the pivot that lets you rotate it, it is well worth the time to set it up right.
Best regards
Mike

gelmonkey · Post by **gelmonkey** » Fri Apr 09, 2010 2:34 pm

Machine Fart
4 wheeled beastie for me.
Hang a small country off that,IMO much more stable than a T based stand.
P

Post by **Coops** » Fri Apr 09, 2010 2:42 pm

this the one i have:
Taken from sealeys web site:

Sealey ES450 Engine Stand 450kg
This engine stand accepts a wide variety of engines and transmissions. The head swivels 360º for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability.
• 450kg Capacity.
• Accepts wide variety of engines and transmissions.
• Head swivels through 360°.
• Swivel castors for easy manoeuvrability.
• Fully adjustable mounting arms.
• Model No. ES450

topcatcustom · Post by **topcatcustom** » Fri Apr 09, 2010 3:50 pm

I got the cheap T shaped one, but I modified it with a stabiliser bar to turn it into an H shape. It really helps as when torque up the mains etc it holds it steady whereas before it would try to tip over. You can see it in this pic, didn't realise how much its changed in there this is a year old!

bclancy · Post by **bclancy** » Fri Apr 09, 2010 4:38 pm

Thanks guys!

Looks like a 'cheapie' sealey with a mod to make it a tad more stable!
This site is a GEM! as are you gents!

Brian

P.S. I dont suppose anybody round here likes beer, bacon butties and helping fit V8's LOL!

ian.stewart · Post by **ian.stewart** » Fri Apr 09, 2010 6:04 pm

topcatproduction wrote:I got the cheap T shaped one, but I modified it with a stabiliser bar to turn it into an H shape. It really helps as when torque up the mains etc it holds it steady whereas before it would try to tip over. You can see it in this pic, didn't realise how much its changed in there this is a year old!

That looks about the same as mine, Got a drip tray that fits along the spine, the thing is attached to the stand using U shaped fence pannel clips,

Post by **Coops** » Fri Apr 09, 2010 6:05 pm

i need the drip tray for mine at some point.

topcatcustom · Post by **topcatcustom** » Fri Apr 09, 2010 8:00 pm

Would be handy, a bit of card is ok though- not too much oil in it on the stand!