Im after a wiring diagram of a 3.9 Hotwire ECU plug !

Slatter · Post by **Slatter** » Tue Feb 20, 2007 7:45 pm

Hi guys .. engine is nearly ready to wire up now, however !!!

The loom which im using off the old racer which was purpose made has just got 6 wires coming out that i dont know where to put! i didnt strip the wiring out of the old racer before you all say i should have labelled them!

I have used my multimeter and have established where the wires go to on the ecu plug and relay boxs.
They will be for +ve to fuel pumps and live input in etc etc.

What im after is a diagram of the ecu plug showing where all the wires go to, if you get what i mean.

Any help would be fantastic.

Thanks Slatter

Post by **Coops** » Tue Feb 20, 2007 7:58 pm

did you look at this????

http://www.v-8.org.uk/images/forumimages/hotwire3.jpg

hearbear · Post by **hearbear** » Fri Feb 23, 2007 9:03 pm

http://www.mediafire.com/?byznzniibq0

This is a list of the pin outs on the ecu in PDF format

George

Slatter · Post by **Slatter** » Fri Feb 23, 2007 9:37 pm

Thanks lads