removal of the dizzy

andyv8van · Post by **andyv8van** » Fri Jan 16, 2009 9:15 pm

Hi,

i`m looking to remove the dizzy, use a electronic set up and set up to use fuel injection as well at a later date.

Anyone got plans as to making the dizzy drive correct when shortened off

the idea is to go fully out and run with a m90 blower.the dizzy seems to be in the way for the pulley`s

i really need to find the list of parts i need to plan the future mods

i`m not fully clued up to a set up like this yet

Andy

Post by **Coops** » Fri Jan 16, 2009 10:13 pm

you will need an ignition unit like megajolt to control the ignition,
if you plan on using efi to then theres megasquirt + megajolt (unless its all in one unit now) theres Vems that does fuel and ignition, emerald do both, dta theres loads out there mate.

ChrisJC · Post by **ChrisJC** » Sat Jan 17, 2009 8:38 am

Depending on your front cover, if you remove the distributor you will still need to find a way to drive the oil pump as it's driven from the end of the distributor shaft.

Chris.

andyv8van · Post by **andyv8van** » Sat Jan 17, 2009 8:58 am

Hi,

Tony,

trigger-wheels seem to do the parts i need.will send email to them

Chris,

i have been looking to see if anyone has modded their dizzy shaft and how i can machine mine to suit.

i may well by one and see what i can do with it. probably the best way.

Andy

ChrisJC · Post by **ChrisJC** » Sat Jan 17, 2009 10:09 am

One of the many Ians has removed his distributor....

Chris.