Is anyone interested in custom built exhausts or manifolds

Post by **Coops** » Sun Mar 16, 2008 10:45 am

Hi Allan,
any more news on this mate,
told you you would get a lot of interest from the forum alone,

i have a list im getting together for bends etc i need for my system.
and wondered what the results were so far regarding the new machine?

dnb · Post by **dnb** » Sun Mar 16, 2008 12:47 pm

I badly want a set of GT40 style crossover manifolds for the Griff. A prototype has been made by a friend and it works extremely well, but it's too much fiddle to make a production run the way these were made!

fordy · Post by **fordy** » Wed Mar 19, 2008 7:52 pm

Rossco, YHM.

dnb · Post by **dnb** » Wed Mar 19, 2008 9:00 pm

Knew you'd find your way here eventually Clive!

Post by **Rossco** » Wed Mar 19, 2008 9:59 pm

So far so good

The machine is here and we are getting to grips with it.

Enquiries off this forum alone are very encouraging.

HairbearTE · Post by **HairbearTE** » Thu Mar 20, 2008 12:24 am

Just out of interest which machine have you bought? Do you reckon you can bend Chrome moly tubing 2"x.080" for example?

gbtv8 · Post by **gbtv8** » Sun Apr 06, 2008 3:29 pm

Hi, I am a recent member and have been looking for a set of manifolds to fit my currenr project so I am really interested in your possible aquisition.
Colin.

Ralphh85 · Post by **Ralphh85** » Mon Apr 07, 2008 10:23 am

i can waterjet cut flanges very cheap if it helps, an have stainless here to.

can your machine ake the end of a pipe bigger so that a puipe the same size can slide inside it?

price dependent i might also want some pipe bending.

Ralph

5000SE · Post by **5000SE** » Wed Apr 23, 2008 11:18 am

In a few months I'll be wanting to make up a system to run from 2.25" collectors to a 3 or 3.25" main pipe, then split into 2.25 or 2.5" tailpipes.

Would you be able to produce the bends I need from cardboard templates or sketches?

chodjinn · Post by **chodjinn** » Tue Apr 29, 2008 6:26 pm

no one heard from rossco yet then?!

Post by **katanaman** » Tue Apr 29, 2008 7:20 pm

chodjinn wrote:no one heard from rossco yet then?!

He has explained in another post what is going on.

3500SE · Post by **3500SE** » Fri May 02, 2008 7:40 pm

Given my 'ongoing' problems with a purchase from Rossco I would suggest a secure method of payment.. 'paypal'

Managed to get down the bank OK....and still advertising

Post by **Rossco** » Mon May 05, 2008 5:01 pm

I owe the forum an apology.

I don't want to go into detail but we lost a member of our immediate family last month and so things are not good for us at the moment.

For those waiting to hear about exhaust bits etc I can't make any promises at the moment.

Scott, your dizzy is on it's way to you as per our last emails.

I know the forum will understand

The V8 Owners Forum -

Is anyone interested in custom built exhausts or manifolds

pipe bending

Exhaust manifolds