Megasquirt IAC & IAT stuff placement

kev_the_mole · Post by **kev_the_mole** » Mon Mar 17, 2008 5:56 pm

With the inlet pipe for the IAC and the IAT sensor can I just drill/punch some holes through the baseplate of my K&N??

I know it's probaly not ideal but I'd like to keep the under bonnet look standard(isH)

Cheers,

Ian

Eliot · Post by **Eliot** » Mon Mar 17, 2008 11:08 pm

Thats pretty much how i done mine.
I tee'd it into the rocker breather pipe, which then attaches to the underside of the pancake filter. I also added another hole underneath the pancake filter for the air temp sender.

pic:
http://www.mez.co.uk/dcam/DSCF0128.JPG

little more at the bottom of:
http://www.mez.co.uk/ms7.html

I dont actually have and idle control valve now anyway, as i need to keep the noise down as much as poss with my moaning neighbor.

kev_the_mole · Post by **kev_the_mole** » Tue Mar 18, 2008 10:09 am

as i need to keep the noise down as much as poss with my moaning neighbor

It really makes that much difference??

Then what you need is a gear cam drive to add that authentic NASCAR whine to his auditory woes!