Hi Gents,
I have an engine which it would appear was originally an early RR carb engine but which has had an EFI system fitted since.
The engine came without an air flow meter. My question is how do I know which air flow meter to get - hotwire or flapper type? What should I look for that would identify which EFI system I have.
TIA
Mart.
Which Air Flow Meter
Moderator: phpBB2 - Administrators
Do you have a resistor pack for the injectors if so 90% sure its a flapper.
If you don't then 90% sure its a hotwire.
But it may need a resistor pack, but you have not got one.
Best tell us what ECU you have plus a picture of the injectors and fuel rail to be 100% sure.
If you don't then 90% sure its a hotwire.
But it may need a resistor pack, but you have not got one.
Best tell us what ECU you have plus a picture of the injectors and fuel rail to be 100% sure.
Current V8 car TVR 400SE 240 BHP
Current Project TVR Tasmin Race, with 3.9 running at 230 BHP
Currently building a 4.6 300 BHP Xbolted Engine for it. Solid Lifters and Group A rockers, Stange 4 heads, Pocketed piston, fully balanced.
Current Project TVR Tasmin Race, with 3.9 running at 230 BHP
Currently building a 4.6 300 BHP Xbolted Engine for it. Solid Lifters and Group A rockers, Stange 4 heads, Pocketed piston, fully balanced.
