Exhaust collectors

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
koopsterman
Forum Contributor
Forum Contributor
Posts: 55
Joined: Sun Nov 07, 2010 9:27 pm
Location: Basildon Essex

Exhaust collectors

Post by koopsterman »

Does anyone know where I can get a pair of 4 into 1 exhast collectors ( just the part where the 4 pipes come in, and 1 goes out ) made in stainless steel??


ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Post by ian.stewart »

Could be worth a nose around the NSRA swap meet at essex arena next sunday, normally loads of rover stuff there
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
katanaman
Site Admin
Site Admin
Posts: 3081
Joined: Fri Nov 17, 2006 7:29 pm
Location: Edinburgh
Contact:

Post by katanaman »

I got all the stuff for my exhausts from Milner Offroad. I don't know if they still do them though.
User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2458
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Post by Ian Anderson »

Cool Air - doo a google search

VW specialists and the cheapest I have found


Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.
koopsterman
Forum Contributor
Forum Contributor
Posts: 55
Joined: Sun Nov 07, 2010 9:27 pm
Location: Basildon Essex

Post by koopsterman »

Thanks for the replies guys, I am going to the swap meet this Sunday on the search, and I will investigate the other leads you have given me and see what it turns up.
Regards
koopsterman
Mark
Knows His Stuff
Knows His Stuff
Posts: 383
Joined: Fri Nov 17, 2006 11:34 pm
Location: Essex

Post by Mark »

I ordered mine from here

http://www.mandrel-bends.com/catalog/co ... s-t-s-100/

They take pay pal and delivery was fairly fast.

Mark
302 V8 Sierra 5 door sleeper under way
User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2458
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Post by Ian Anderson »

http://www.coolairvw.co.uk/Item/Shop_by ... haust.html

Call them and for about £40 they will do the collector and short tail only

Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.
stevieturbo
Forum Contributor
Forum Contributor
Posts: 4075
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

Lance at OJZ Engineering can make you whatever you need. Although it wont be cheap, his workmanship is superb
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0
Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”