Real Steel Tornado cam
Moderator: phpBB2 - Administrators
-
CastleMGBV8
- Top Dog
- Posts: 2334
- Joined: Sat Aug 18, 2007 5:09 pm
- Location: Sidcup, Kent, UK
Not personally but it's virtually identical to the Crower 50232 in specification.
That cam is said to have a slightly lumpy idle at 1000RPM and not a lot of power until about 3000RPM on a 3.5
I'm using the Crower 50232 in my new engine but thats 4.35 so hoping the extra cc's will soften the characteristics a bit but still give good top end peaking at 5500 but capable of 6500RPM if required.
Kevin
That cam is said to have a slightly lumpy idle at 1000RPM and not a lot of power until about 3000RPM on a 3.5
I'm using the Crower 50232 in my new engine but thats 4.35 so hoping the extra cc's will soften the characteristics a bit but still give good top end peaking at 5500 but capable of 6500RPM if required.
Kevin
