Rebuilt me 350 chev

Post by **demo2** » Sat Oct 13, 2007 2:40 pm

Been offline a while as been busy rebuildin me chev, heres the pics:

Alley Kat · Post by **Alley Kat** » Sat Oct 13, 2007 3:48 pm

Looking very smart there... Have you put any 'fast' parts in?

Post by **demo2** » Sat Oct 13, 2007 3:56 pm

Had it bored 40 thou over and fitted hypertectic pistons, decked the block to zero and removed 20 thou from the heads 2 get cr up, the cam ic ouldnt find out any info on, what brand it was etc, measured the lift 2 be 485 thou at the valves, duration i have no idea. It had a sorta lumpy idle before so is a warmish cam. Is fitted with a 750 vac holley but mainly runs lpg. No real fast parts as it lives in a 4wd, which needs ther torque( especially when its gettin nailed in the sand dunes or on the beach. Fire it up moro mornin, will let u know how it goes.

Post by **demo2** » Sat Oct 13, 2007 3:57 pm

oh and an edlebrock intake manifold too

Alley Kat · Post by **Alley Kat** » Sat Oct 13, 2007 4:03 pm

Nice ...

good luck for tomorrow!