Rad Fans?

Post by **Coops** » Thu Nov 07, 2013 5:09 pm

can't move the intercooler any further forward mate or the radiator any further back,

I need some f**k off powerful fans

if I cut some more panel work away behind the grill I maybe able to fit one or two pusher fans onto the front of the intercooler that come on with the rad fans,
would that help???

kiwicar · Post by **kiwicar** » Thu Nov 07, 2013 8:45 pm

Hi Tony
biggest thing that will help with the fans is to get them to pull air from all of the core, enclose the back of the rad and put the fans in the cowl like this http://www.ebay.co.uk/itm/RANGE-ROVER-P ... 43bd57a621
then if needs it get some bigger fans, but I think the cowl will make far more difference than more power in the fan motor. Those fans and that rad you have in the photo should be more than enough to cool a rover even with a big blower on it. However if you can move the fans off the face of the rad even by 1/2 an inch will help, but only if you seal the back of the rad core to the fans and make sure the hot air from engine bay cannot move forward and into the core from the top of the radiator.
Best regards
Mike

Post by **Coops** » Sat Nov 09, 2013 6:25 pm

we have a cool running cappa, sat happily in the garage with fans cutting in and out,
Now the fans are working can concentrate over the winter making a cowl to house them in to maximise the cooling through the whole of the rad core

Post by **Coops** » Thu Mar 13, 2014 6:59 pm

Guys need some help finding the cfm rating of these fans please,

GATE - SpA - ASTI

MP8015

132DC

Ian Anderson · Post by **Ian Anderson** » Thu Mar 13, 2014 7:44 pm

Coops wrote:Guys need some help finding the cfm rating of these fans please,

GATE - SpA - ASTI 470 straight blade 4 blade higher profile 750 based On9 inch fan

MP8015.

132DC