DLM8 VR sensor resistance.

DaveEFI · Post by **DaveEFI** » Sat Sep 07, 2013 2:00 pm

Anyone got a known good one handy?

According to my SD1 BL manual the resistance of the VR sensor (pick-up) on a DLM dizzy is 950-1150 ohms. A pal measured his and found it to be 3,300 ohms. I've just found an old dizzy and measured that - same 3K3.

hirot · Post by **hirot** » Sat Sep 07, 2013 4:48 pm

Havn't got one but I did find this which explains how to test it.

Enjoy.

http://www.msextra.com/doc/ms2extra/MS2-Extra_Dizzy.htm

Regards Ian