Cylinder head interchangability 3.5 3.9 4.6.....Etc.

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
senator30e
Newbie
Newbie
Posts: 1
Joined: Sat May 19, 2007 6:33 pm

Cylinder head interchangability 3.5 3.9 4.6.....Etc.

Post by senator30e »

I'm sure this has been asked many times before, but what is the interchangability on the Rover V8 heads?.

Will the HRC2479 replace the standard heads on a 1984 SD1 carb engine as long as they are fitted with composite gaskets?. Same goes for the HRC2210 heads - what would be the benefits, if any, of using these heads over standard SD1 items on a very mildly modified 3.5 engine (9.75 pistons, 3.9 Range Rover cam)?.

Thanks.


katanaman
Site Admin
Site Admin
Posts: 3081
Joined: Fri Nov 17, 2006 7:29 pm
Location: Edinburgh
Contact:

Post by katanaman »

They fit but there is no real benefit to using them other than you can use comp gaskets and not hurt your compression. Certainly not worth going out to buy them specially to get a performance boost.
Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”