Was a Paxton supercharger conversion, now a Rotrex C38-91
Moderator: phpBB2 - Administrators
Bit of an update,
trying to get the intercooler mounted before the car gets moved to my mums while we move house,
if i have my calcs right i now only need to let the intercooler inlet/outlet pipes 40mm into the bonnet slam panel, BUT i noticed tonight the intercooler may now foul on the bonnet mech, so need to have a proper look once the panels cut etc,
are there any nice looking pins out there instead of the trev R clip ones???
trying to get the intercooler mounted before the car gets moved to my mums while we move house,
if i have my calcs right i now only need to let the intercooler inlet/outlet pipes 40mm into the bonnet slam panel, BUT i noticed tonight the intercooler may now foul on the bonnet mech, so need to have a proper look once the panels cut etc,
are there any nice looking pins out there instead of the trev R clip ones???
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
Cheers mate will do a search for them
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
Bit of an expensive night
managed to get the rad and intercooler to go in together, then after a bit of trimming the rad can be removed leaving the intercooler behind.
Still need to trim the panel to let the outlet/inlet pipes of the intercooler go up higher allowing the rad to be lifted a bit more giving clearance to the temp switch,
had an off moment, rad got jammed yanked on it in temper leaving the bottom half behind and snapping one of the pipes off the oil cooler
New rad and oil cooler added to the shopping list,
Also had confirmation today the new charger kit will be ready for me to collect in a week/2 weeks
the rad and intercooler together before i lost it and broke it
managed to get the rad and intercooler to go in together, then after a bit of trimming the rad can be removed leaving the intercooler behind.
Still need to trim the panel to let the outlet/inlet pipes of the intercooler go up higher allowing the rad to be lifted a bit more giving clearance to the temp switch,
had an off moment, rad got jammed yanked on it in temper leaving the bottom half behind and snapping one of the pipes off the oil cooler
New rad and oil cooler added to the shopping list,
Also had confirmation today the new charger kit will be ready for me to collect in a week/2 weeks
the rad and intercooler together before i lost it and broke it
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
its fucked mate, rad has been in the cappa for over 14yrs, and it was S/H when i got it too, the base plate that clamps the bottom of the rad together has rotted out and its all fell apart, the ally core is still good though
So ideal time to renew it, once someone bothers mailing me back confirming its the ally rad they have for sale and not the copper one.
The oilcooler maybe repairable, but ordered a new mocal oil cooler tonight and will be here the weekend,
So ideal time to renew it, once someone bothers mailing me back confirming its the ally rad they have for sale and not the copper one.
The oilcooler maybe repairable, but ordered a new mocal oil cooler tonight and will be here the weekend,
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
the problem is the outlets mate,
had all my hoses and stainless pipes etc made to fit the audi rad, and the cossie rad different sides , (i think).
had all my hoses and stainless pipes etc made to fit the audi rad, and the cossie rad different sides , (i think).
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
Rad companies on ebay selling replacement audi ally rads for £50-£70,
one of the v8 capri boys bought one from ebay and had no probs with it, (have mailed them waiting on a reply)
one good thing with the rad breaking, it means i can change the lower rad support bracket as never liked it, and with cutting the crossmember support away to clear the intercooler i can now change it to a better mount.
one of the v8 capri boys bought one from ebay and had no probs with it, (have mailed them waiting on a reply)
one good thing with the rad breaking, it means i can change the lower rad support bracket as never liked it, and with cutting the crossmember support away to clear the intercooler i can now change it to a better mount.
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
point taken mate, thanks.
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
Had another night in the garage after work,
trimmed a bit more of the front panel and found RUST!!!!, so trimmed more out to make good, and trimmed other side to match, bit of knock on around the cut out once painted etc should make it look better i hope,
Can't lift the intercooler any higher now as its tight up under the hump of the panel,
The rad goes back in now BUT 10mm lower to clear the cooler pipes,
need to trim some of the cross member/valence section away in the engine bay to allow clearance for the new fans,
Once the new Rad is ordered and gets hear i can make up the new lower rad mounts,
All in All its getting there,
trimmed a bit more of the front panel and found RUST!!!!, so trimmed more out to make good, and trimmed other side to match, bit of knock on around the cut out once painted etc should make it look better i hope,
Can't lift the intercooler any higher now as its tight up under the hump of the panel,
The rad goes back in now BUT 10mm lower to clear the cooler pipes,
need to trim some of the cross member/valence section away in the engine bay to allow clearance for the new fans,
Once the new Rad is ordered and gets hear i can make up the new lower rad mounts,
All in All its getting there,
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
SHHHHHHHHHHHH thats the secret stash in the man cave,
Ferne wonders why im in the garage a lot recently in this cold weather,
working on the car YEAH RIGHT
Ferne wonders why im in the garage a lot recently in this cold weather,
working on the car YEAH RIGHT
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk