Chevy ls engine
Moderator: phpBB2 - Administrators
-
- Newbie
- Posts: 46
- Joined: Fri Jan 27, 2012 10:53 am
- Location: burntwood
-
- Forum Contributor
- Posts: 4054
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
Re: Chevy ls engine
How long is a piece of string ?ford100ev8 wrote:What chevy ls engine is the best , all alloy or iron block , 5.3 or 6.0 ,
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0
Re: Chevy ls engine
Twice as long as half of itstevieturbo wrote:How long is a piece of string ?


Big Tone
www.cobratone.co.uk
www.cobratone.co.uk
-
- Forum Contributor
- Posts: 4054
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
5.3 alloy block is probably the strongest of the alloy blocks. Thicker liners, and thicker walls behind the liners. And more block deck between cylinders, so better head gasket sealing.kiwicar wrote:As said above it depends on application, all out drag/bonnoville applications it has to be the 6l iron block, for more normal applications the 5.3 ally block is fine. You will need in excess of about 800 bhp to worry about splitting an ally block.
Best regards
Mike
If only they were readily available here, they'd be a great swap engine. The 4.8's and 5.3's seem to be dirt cheap in the US too.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0
-
- Newbie
- Posts: 46
- Joined: Fri Jan 27, 2012 10:53 am
- Location: burntwood
-
- Forum Contributor
- Posts: 4054
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
UK seller. Lives about 20 mins drive from me. He makes 60's F1 replicas and uses these engines as his power plant. He gets a load shipped in from the US and refurbs them. He also sells some off now and again a second hand engines. No warranty as such but I can choose the one I want. All less than 60k on them, IIRC. He said if I drop the sump and there was any sign of anything nasty he'd swap it for another one. Better chance than most second hand engine sales, if you ask me.stevieturbo wrote:UK seller or US ?ford100ev8 wrote:I have seen the 5.3 alloy engine on eBay for £1500 , it doesn't seam bad
I wouldnt risk buying such a thing off a foreign ebay, unless it was a 1000% trusted reputable seller.
-
- Forum Contributor
- Posts: 4054
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
-
- Forum Contributor
- Posts: 4054
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
Good link !JJMclure wrote:Have a look at Lsxp.net
Just cant help thinking their prices....well, it could still be cheaper to buy direct from the US given most are basically bare engines.
This guy's is a fair bit cheaper, and sounds like the guy Volo bought his from ?
http://www.ebay.co.uk/itm/CHEVY-L33-V8- ... 43b774fcf3
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0