Rover V8 Cylinder Head and Rocker Covers - a question

Garry · Post by **Garry** » Mon Jul 02, 2012 8:58 pm

I am carrying out an MGB V8 conversion. The cylinder heads on the engine I have are marked up ERC0216 and are 14 bolt fixing.

I have some Rover P6 Rocker Covers and I am unsure whether they are suitable for these cylinder heads as I cannot identify the age of the heads.

I would be grateful for any help anyone can give

Thanks

Garry

Post by **Coops** » Mon Jul 02, 2012 9:03 pm

if you search you shall find,

look here mate: http://www.v8forum.co.uk/forum/viewtopic.php?t=133

softdash3.9 · Post by **softdash3.9** » Mon Jul 02, 2012 9:41 pm

P6 Rocker covers will fit and should be fine

ian.stewart · Post by **ian.stewart** » Mon Jul 02, 2012 9:50 pm

yip they fit and clear roller rockers too,

Robrover · Post by **Robrover** » Tue Jul 03, 2012 8:08 am

I'm using chromed P6 covers on my 4.6 with Yella Terra roller rockers and a high lift cam. To get the clearance needed under the covers I fitted spacers like these along with Felpro gaskets

http://www.ebay.co.uk/itm/Rocker-Valve- ... 3a5c39e603