Edelbrock inlet manifold

timnutt · Post by **timnutt** » Mon Feb 27, 2012 9:44 pm

Hi,

Just bought an Edelbrock inlet manifold and 500 carb for my Rover v8 project. Question is what is the threaded port on the top of he manifold for an d what fitting does it take. I've borrowed a picture from RPi. The port is just above the label "Engine Front"

Thanks
TimN

mgbv8 · Post by **mgbv8** » Mon Feb 27, 2012 10:13 pm

Its a vac port for the brake servo.
But the carb has one as well so you can blank it off if you want to.