intake rover v8?

scotb · Post by **scotb** » Tue May 17, 2011 7:46 pm

anyone cut and modified a rover 3.5 v8 SU manifold to accept an edl500 carb? just a thought,would like advice if anyones succeeded

scotb · Post by **scotb** » Wed May 18, 2011 3:59 pm

i`ll get me coat then..............

Ian Anderson · Post by **Ian Anderson** » Wed May 18, 2011 4:04 pm

Yes

See
http://www.mez.co.uk/ms12.html
About 2/3 the way down

Ian

sidecar · Post by **sidecar** » Wed May 18, 2011 4:07 pm

I think if you look at the SU's and Rover manifold setup as a complete unit then thing that holds back the power is the manifold not the SU's Therefore you are focusing on the wrong thing really.

Now SU's and the standard manifold is not really my thing so I could be talking bo-larks!

scotb · Post by **scotb** » Wed May 18, 2011 4:14 pm

Ian Anderson wrote:Yes

See
http://www.mez.co.uk/ms12.html
About 2/3 the way down

Ian

thats just what i was looking for mate thanks. now to get my finger out and cut away some ally