Rover V8 3.9 EFI - some running issues!

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5077
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

I have swapped a viscous fan for an electric one in the past. It made absolutely no difference to fuel economy, and certainly didn't help cooling on hot days in traffic.......

Chris.


--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
DaveEFI
Gold Member
Gold Member
Posts: 4603
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Post by DaveEFI »

mosesthemonk wrote:
[snip]
I will be removing the air conditioning compressor, and probably the viscous fan too. I'll rebuild it and see if it still pi$$€$ coolant into the sump and compression into the radiator :shock: , if not I'll be removing the exhaust which is a bit knackered and I am thinking of fitting a Rimmer Bros stainless steel sports system. Has anyone here got any experience with these systems? Are they worth the money? £510 seems reasonable with a lifetime warranty!
Cheers everyone!
Moses :D
Removing the AC condenser - for repair - made a big difference to the temperature my VDP EFI runs at in heavy traffic. With it in place - but AC not working - I would regularly see the gauge read over 100C. Without it, it stays at about 90C. The condenser didn't look blocked with anything - just the usual corrosion on the ally fins.

As regards the Rimmer sports exhaust, I've had one for many a year. It's beautifully made, and I'd say has saved me quite a bit of money through not having to replace rotten bits every couple of years. It also dismantles easily if you ever need to - unlike a mild steel system.

Note, however, it is very loud which can be wearing on a long journey. And if you opt for the straight rear pipe will likely get fumes into the car. The optional cranked over to the right one sorts this.
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y
ramon alban
Knows His Stuff
Knows His Stuff
Posts: 667
Joined: Fri Nov 17, 2006 11:22 pm
Location: Bedford UK
Contact:

Post by ramon alban »

DaveEFI wrote: if you opt for the straight rear pipe will likely get fumes into the car. The optional cranked over to the right one sorts this.
Do Range Rover's have the same aerodynamic problems as SD1's?
R.
DaveEFI
Gold Member
Gold Member
Posts: 4603
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Post by DaveEFI »

ramon alban wrote:
DaveEFI wrote: if you opt for the straight rear pipe will likely get fumes into the car. The optional cranked over to the right one sorts this.
Do Range Rover's have the same aerodynamic problems as SD1's?
R.
Given they also have a cranked over pipe as standard I'm guessing yes.
But I'm not sure it's a 'problem' - there will always be some pressure differential when air flows over a vehicle body.
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y
User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5077
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

ramon alban wrote:
DaveEFI wrote: if you opt for the straight rear pipe will likely get fumes into the car. The optional cranked over to the right one sorts this.
Do Range Rover's have the same aerodynamic problems as SD1's?
R.
I would think so, judging by the amount of crap that splatters the rear of a Rangie when driving on wet roads.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”