Which Inlet Manifold

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
User avatar
daxtojeiro
Forum Sponsor
Forum Sponsor
Posts: 330
Joined: Sat Nov 25, 2006 12:10 am
Location: Norwich UK
Contact:
Contact daxtojeiro

Post by daxtojeiro »

Robrover wrote:Phil - what are V8 Dev wanting for a 5.4 block, pistons, rods and crank - they only seem to list up to 5.3 on their site.

Thinking of bolting my Buick 300 heads to something bigger than the 4.6. Flow bench indicates they'll support over 400hp potentially which could be interesting with the right cam and induction.
Im not sure of the total cost, best thing to do is ring Rob at V8D, but I dont think the 5.4 is much more than the 5.3, so to me it was a no brainer, bigger is better :)
Phil


Image


http://www.extraefi.co.uk/cobra/accobra.htm SuperCharged 5325cc V8 Cobra Replica (Full sequential Fuel and Ignition MS3 management)
Top
Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”