One for the Classic Range Rover Guys

Post by **Rossco** » Sun Jan 02, 2011 12:44 pm

Can some kind dude measure the height difference between the top of the suspension turrets and the top of the plenum.

Cheers

gulf blue rsr · Post by **gulf blue rsr** » Thu Jan 06, 2011 10:00 pm

Do you still need the measurement? I should be able to do this for you on the w/e if you need the answer still or are you sorted?

Steve

Post by **Rossco** » Sat Jan 08, 2011 12:23 pm

Hi, thanks I could still do with the measurement.

Can you also measure the height difference from the suspension turrets to the top of the rocker covers.

Cheers

Rossco

Post by **Rossco** » Mon Jan 10, 2011 4:03 pm

.....anyone???????

gulf blue rsr · Post by **gulf blue rsr** » Mon Jan 10, 2011 9:35 pm

Hi Rossco,

took a measurement from the top of the plenum which is 6 3/4" and from the top of the rocker covers is only about 1/4" to 1/2" at the most

Just so we are sure that I have measured from where you need I took a couple of pics, you will have to excuse the mud I use it for playing

but not for a long time now as not much spare time these days!!

Sorry it took a while we had unexpected visitors over the w/e so any plans I had went out the window!! I actually logged on last night to give you the measurements but then clean forgot!!

Hope they are what you are after if not let me know and I'll go get some more but won't be about during the daylight till later in the week now.

Steve

Post by **Rossco** » Mon Jan 10, 2011 10:27 pm

Thanks Steve that's exactly what I needed to set the 455 at the right height.

gulf blue rsr · Post by **gulf blue rsr** » Mon Jan 10, 2011 11:33 pm

No problem, need anything else checking just ask away

Steve