Exhaust Manifold Gaskets,

Post by **Coops** » Sun Mar 11, 2007 8:39 pm

Any one know where to get these gaskets from????
Im running a set at the moment, but when i change the heads i want to replace the gaskets, (ones in the picture i have been loaned)
Im going to open up the exhaust ports to match the gaskets also once i have a set.

the only ones i have found so far are these, which i have been told are catalic ones

r2d2hp · Post by **r2d2hp** » Sun Mar 11, 2007 9:11 pm

V8Dev sell them Tony

Post by **Coops** » Sun Mar 11, 2007 9:27 pm

the top ones reg???

r2d2hp · Post by **r2d2hp** » Sun Mar 11, 2007 10:29 pm

Yes mate, Am sure thats who I purchased mine from.

Post by **katanaman** » Sun Mar 11, 2007 11:25 pm

Looks like RPI does them too, they have a set on fleebay but they include studs and nuts. Probably do gaskets on their own tho. Have you tried Jim? That's who you got your last set from wasn't it?

Post by **Coops** » Sun Mar 11, 2007 11:29 pm

yes i did Marki,
but when i contacted Jim last year he said he could no longer get them

GreenV8S · Post by **GreenV8S** » Mon Mar 12, 2007 10:45 pm

The ones you're after look like the twin metal composite ones I get from RPI.

Post by **Coops** » Mon Mar 12, 2007 10:48 pm

you got a picture Pete?

ian.stewart · Post by **ian.stewart** » Tue Mar 13, 2007 6:05 am

POP BROWNS do over size single gaskets if anyone is intrested.

IainB · Post by **IainB** » Tue Mar 13, 2007 10:09 am

Dont Real Steel also do these, sure Ive seen them / purchased them from there (albeit a LONG time ago!)

GreenV8S · Post by **GreenV8S** » Wed Mar 14, 2007 11:54 pm

thev8kid wrote:you got a picture Pete?

"Here's one I prepared earlier".

The port dimensions are 26mm wide 37.5mm high. The ones I've bought previously aren't as chunky as these but the port dimensions are the same. You can't see it from the picture, but they're about 2mm thick and consist of a fibrous matrix with a wire mesh through the middle of it.

Post by **Coops** » Thu Mar 15, 2007 12:08 am

ah yeah seen them before,
im trying to locate the ones that i have in the pictures, as these seem to be the best ones i have used for sealing so far.

Eliot · Post by **Eliot** » Thu Mar 15, 2007 6:55 am

the topmost ones look very oem. they may be from the later 4.6 engines.

Post by **Coops** » Thu Mar 15, 2007 6:05 pm

Eliot wrote:the topmost ones look very oem. they may be from the later 4.6 engines.

correct,
but nobody seems to stock them now, just the ones like greenv8s posted

GreenV8S · Post by **GreenV8S** » Mon Mar 26, 2007 9:36 pm

thev8kid wrote:ah yeah seen them before,
im trying to locate the ones that i have in the pictures, as these seem to be the best ones i have used for sealing so far.

Sorry those aren't what you want.

By chance I came across this advert recently which looks very similar to the ones you asked about:

http://www.clever-trevor.net/part/43/ex ... s0091.html

I haven't seen these in the flesh though.