ROVER V8 LT77 GEARBOX CLUTCH SLAVE

scimitar0 · Post by **scimitar0** » Mon Jan 29, 2007 8:58 pm

Hi
I am currently fitting a rover V8 to my scimitar SE5A, I have misplaced the bolts for the clutch slave cylinder for the LT77 gearbox, doh ! can anyone tell me what size and thread they are please ?

cheers

Phil

Andy515666 · Post by **Andy515666** » Wed Feb 07, 2007 9:50 pm

Hi Phil

I had the same problem and when I used what I thought were the right bolts i ended up threading one of the holes.

After much loud vocal abuse at myself I ended up getting a tap set and re threading both holes to fit different bolts. I wlil have a look tonight and see what the side of the bolts are.

Andrew

jrv8 · Post by **jrv8** » Thu Feb 08, 2007 11:30 am

Hi ,
Thread size is M8
an M8 x 35 bolt should be ok for length.
Regards
Jim

scoobyv8 · Post by **scoobyv8** » Thu Feb 08, 2007 7:19 pm

jrv8 wrote:Hi ,
Thread size is M8
an M8 x 35 bolt should be ok for length.
Regards
Jim

^^^^^
i'm guessing you mean M8 by 1.25 pitch, by 35 mm long

just thought i'd clarify that, to keep the chap right
George