plug leads and firing order

V8 RX-7 · Post by **V8 RX-7** » Thu Apr 30, 2009 6:12 pm

have just changed plug leads from a range rover engine to sd1, was going to fit dizzy cap but is different, i want to make sure firing order is correct cannot anyone point me in right direction for a diagram etc havent got a manual yet.

RoverP6B · Post by **RoverP6B** » Fri May 01, 2009 5:22 am

This will help http://www.roversd1.nl/sd1web/

If by chance you end up at the home page, select techtalk, then electrics and finally ignition.

Ron.

ChrisJC · Post by **ChrisJC** » Fri May 01, 2009 6:59 am

If you have lost the 'index', then remove the 'even' rocker cover, turn the engine until both valves on no. 6 are open equally. This point is No. 1 & TDC.

Chris.

V8 RX-7 · Post by **V8 RX-7** » Fri May 01, 2009 8:30 am

many thanks for that