blue oil smoke

General Chat About Engine Build

Moderator: phpBB2 - Administrators

Post Reply
User avatar
Wotland
Forum Contributor
Forum Contributor
Posts: 770
Joined: Sat Nov 18, 2006 8:45 am
Location: Belgium

blue oil smoke

Post by Wotland »

Hello,
I post here for a friend who has an 3.9 converted to 4.2.
Normally pistons were installed with new rings and block has been honed.
The problem, only during deceleration and only when the car is on a slope, the engine smokes blue.
In other situation the car doesn't smoke.

Any idea why it only smokes on a slope and deceleration ?

Do you think it can be the rings or valve oil seals ?

Thank for your help.


roofman
Helpful or Confused
Helpful or Confused
Posts: 54
Joined: Mon May 05, 2008 2:37 pm
Location: northwest (chester region)

Re: blue oil smoke

Post by roofman »

Wotland wrote:Hello,
I post here for a friend who has an 3.9 converted to 4.2.
Normally pistons were installed with new rings and block has been honed.
The problem, only during deceleration and only when the car is on a slope, the engine smokes blue.
In other situation the car doesn't smoke.

Any idea why it only smokes on a slope and deceleration ?

Do you think it can be the rings or valve oil seals ?

Thank for your help.
sounds like its got too much oil in the sump and its well above the baffle plate allowing oil to surge forward or back then up into the bores
91 classic vouge...2" lift...31-12.50/15 muds and running a 3.5
User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5077
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

Agreed - check that the dipstick matches the dipstick tube.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Post Reply

Return to “Engines Area”