Packaging may be a problem,

General Chat About Engine Build

Moderator: phpBB2 - Administrators

Post Reply
ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Packaging may be a problem,

Post by ian.stewart »

Its getting tight in the engine bay, and I still have to plumb the nitrous,,
Its now running coilpacks Ive even cut down my Magnecors :shock: to suit, the cut off dissy looks as if its going to work as wel complete with oil feed to the top so it rund down onto the chain,
Its looking tight for sunday at the weald but If I can get it in and started tomorrow and use sat for setting up
Image
Image
Image
Image


THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
Top
r2d2hp
Forum Contributor
Forum Contributor
Posts: 657
Joined: Fri Nov 17, 2006 7:52 pm
Location: Gt Missenden

Post by r2d2hp »

Whats the pipe from the dizzy for Ian.
Top
ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Post by ian.stewart »

the pipe is an oil feed into the top of the dummy shaft then hopefully down onto the chain
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
Top
Post Reply

Return to “Engines Area”