water pump help

Garth84x · Post by **Garth84x** » Sat May 03, 2008 11:23 pm

hi all, i think that i need a smaller water pump as it's a bit... well a lot to long, the v8 is from a range rover classic around '76 ish

are there smaller pumps available for the range rover engine?

garry

RoverP6B · Post by **RoverP6B** » Sun May 04, 2008 8:12 am

Hello Garth,

A Range Rover from 1976,...if the pump you have tried is either from that engine or from and SD1, then to get a much shorter 'nose', go for a pump for a P6B. They have the shortest nose of any water pump for the Rover V8.

The outline of the pump where it meets the timing cover is the same as that for an SD1.

Ron.

stevieturbo · Post by **stevieturbo** » Sun May 04, 2008 9:43 am

Angle grinder

I used an SD1 pump, and my friend above.