is there a kit to convert the cable clutch in my escort to the hydraulic one or is there a good method to do this all help is really appreciated
cheers
Dan
clutch control
Moderator: phpBB2 - Administrators
-
V8Cabriolet
- Newbie
- Posts: 13
- Joined: Sat Apr 26, 2008 3:59 pm
- Location: ANDOVER
clutch control
can any one help me with my dilema?
is there a kit to convert the cable clutch in my escort to the hydraulic one or is there a good method to do this all help is really appreciated
cheers
Dan
is there a kit to convert the cable clutch in my escort to the hydraulic one or is there a good method to do this all help is really appreciated
cheers
Dan
IM TRYING TO BUILD A V8 Rover 220 Coupe need all the help i can get really got the engine just want to know what axle i need to use or what would be best
Hi
There are various options, use a concentric slave cylinder set up from Burton or someone similar, one of those "universal" jobbies that sits over the input shaft of the gear box. Or find a slave cylinder that you can mount on the bell housing and link it up to your cable clutch arm, then sort out a master cylinder. I'm afraid as far as I see it it will be a do it yourself set up but far from impossable.
Mike
There are various options, use a concentric slave cylinder set up from Burton or someone similar, one of those "universal" jobbies that sits over the input shaft of the gear box. Or find a slave cylinder that you can mount on the bell housing and link it up to your cable clutch arm, then sort out a master cylinder. I'm afraid as far as I see it it will be a do it yourself set up but far from impossable.
Mike
poppet valves rule!
