I am in need of the top bolt that holds the bracket on does anyone have a spare or do I have to see if rimmers do one...
Also they way i have fitted this does it look right ?
top bolt rover v8 sd1
Moderator: phpBB2 - Administrators
-
Monster V8
- Helpful or Confused
- Posts: 67
- Joined: Sat Apr 12, 2008 9:59 pm
top bolt rover v8 sd1
Can any one help
I am in need of the top bolt that holds the bracket on does anyone have a spare or do I have to see if rimmers do one...
Also they way i have fitted this does it look right ?
I am in need of the top bolt that holds the bracket on does anyone have a spare or do I have to see if rimmers do one...
Also they way i have fitted this does it look right ?
Don't look right to me.
See http://www.pistonheads.com/gassing/topi ... 0&t=511084
Lots of engine pic's there.
There are a lot of companies doing replacement stainless bolts on ebay, may be the easiest way, will also look better.
See http://www.pistonheads.com/gassing/topi ... 0&t=511084
Lots of engine pic's there.
There are a lot of companies doing replacement stainless bolts on ebay, may be the easiest way, will also look better.
Current V8 car TVR 400SE 240 BHP
Current Project TVR Tasmin Race, with 3.9 running at 230 BHP
Currently building a 4.6 300 BHP Xbolted Engine for it. Solid Lifters and Group A rockers, Stange 4 heads, Pocketed piston, fully balanced.
Current Project TVR Tasmin Race, with 3.9 running at 230 BHP
Currently building a 4.6 300 BHP Xbolted Engine for it. Solid Lifters and Group A rockers, Stange 4 heads, Pocketed piston, fully balanced.
-
stevieturbo
- Forum Contributor
- Posts: 4054
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
