Hi Gents , been lurking on the forum for a while - excellent site .
I have an offroad Landy with an RV8 fitted with a new Weber/ Edel 500 . I have fitted the offroad needle kit but seemed to get starvation on the steeper climbs

. I removed the offroad needles and seats and now get flooding on the steeper climbs . Apart from that the carb has been a joy but this cutting out at the worst possible moment is getting a bit dangerous

. I'm going to switch back to the offroad needles and raise the float level from the 7/16 ths . I'll maybe try and drop the float level as much as i can without the float hitting the bottom of the float bowl .
Anyone got any sugestions or had similar probs ?. I'm going to re install my 30 year old SU's if i don't get this sorted out . Any help apreciated , thanks , gordon .