Holley/Offenhauser install pics needed please.

BudgieV8 · Post by **BudgieV8** » Sun Mar 09, 2008 8:23 am

Hi all.
I'm fitting a Holley carb on an Offenhauser manifold onto my SD1V8 which is fitted in my Mk1 Capri. The Carb/Manifold came as one bit from a friend so I just need to see what connects to what.

Problem is I'm not sure if the carb has come with all the linkages, & I'm not sure what connects to what both with the Carb & Manifold

Does anyone have any pics of the Holley/Offenhauser fitted & working showing where the pipes & linkages go please? I will post some pics of what I have later today, but seeing pics of a fitted item would help me loads.

tetlow · Post by **tetlow** » Sun Mar 09, 2008 8:31 am

Budgie

I have a few pic's from my holly I removed ages ago, too many for here.

If you send me your email address I will send you what I have.

Dave

BudgieV8 · Post by **BudgieV8** » Sun Mar 09, 2008 8:49 am

PM sent, Thankyou

BudgieV8 · Post by **BudgieV8** » Sun Mar 09, 2008 5:19 pm

Pics:
Top view

Right hand view

Left hand view

Rear left

Front right

Help identifying what connects to what & how the linkages work most appreciated please.

Post by **katanaman** » Sun Mar 09, 2008 7:16 pm

Things I can see missing or cant see in the pics anyway are cold start chokes and a bracket to mount you throttle cable on.

Pic 2 large pipe pointing towards camera looks like break servo vac connection.

Pic 3 pipe at left pointing at an angle is the fuel. Throttle cable goes onto bottom of the lever centre of pic

Last pic small pipe low down bellow float bowl is vac for the dizzi

That's about all you need really, there is a small pipe coming out the float bowl, that will be an overflow.