Lada Niva...............
Moderator: phpBB2 - Administrators
-
- Newbie
- Posts: 2
- Joined: Fri Sep 28, 2007 10:21 am
Lada Niva...............
Dont laugh, has anyone read about one anywhere or know anyone who has done a V8 fit into one ?
Remember different is good !
Ivan
Remember different is good !
Ivan
-
- Forum Contributor
- Posts: 310
- Joined: Sun Nov 19, 2006 9:42 am
- Location: Near Darlington
No, but I know of a V8 Trabant: www.oddrods.co.uk
-
- Newbie
- Posts: 2
- Joined: Fri Sep 28, 2007 10:21 am
Cheers
Thanks for the replies, but still finding it hard to source advice on this engine swap I propose doing...........
heres another link to the trabant rod, he is a craftsman !
http://www.hotrodphotos.co.uk/Wayne'sTrabant.htm
HELP !
heres another link to the trabant rod, he is a craftsman !
http://www.hotrodphotos.co.uk/Wayne'sTrabant.htm
HELP !
The builder is my mate Wayne, and the photos side is run by another mate, Mark who's building an awesome pro-street Pop.
Sorry no help! time to hit Google I guess, throws up 1 or 2 like:
http://extrememagazine.com.au/main.htm
Sorry no help! time to hit Google I guess, throws up 1 or 2 like:
http://extrememagazine.com.au/main.htm
Re: Cheers
As you say 'different is good', so the idea of doing something different is that nobody else has done it before, else it ain't gonna be different.kremlingazette wrote:Thanks for the replies, but still finding it hard to source advice on this engine swap I propose doing...........
heres another link to the trabant rod, he is a craftsman !
http://www.hotrodphotos.co.uk/Wayne'sTrabant.htm
HELP !
If there was a whole wealth of info on swapping V8s into a Lada Niva it would be just another boring engine swap. I reckon just buy a Lada, buy a V8, and get out the gas axe.
re
Been there,tried it.Really doesn't fit.The engine and drivetrain is off set way to 1 side preventing it.Options would be to cut all the floorpan and mounts out and fabricate all new stuff as the air bag suspension guys did(Car for sale on Ebay at the moment )or use a really narrow v engine like a vr6 golf and posibly a buick/commodore v6 which I have heard of but have never seen a pic or write up on.I have a Fiat 130 60 degree v6 and that is too tight as well.its 4-5 inches narrower than a rover.If you move the drive train to the centre,you would need a new centered front diff,new driveshafts to suit,lift the motor to clear the diff,move the firewall back,move the brake booster and master cyl,clutch cyl........list goes on.
Maybe a wrx turbo would be the go?
Doug
Maybe a wrx turbo would be the go?
Doug
-
- Newbie
- Posts: 33
- Joined: Tue Feb 13, 2007 8:45 pm
- Location: kinghorn, fife