which 3.5 flapper .help

dirk · Post by **dirk** » Thu Aug 30, 2007 8:54 pm

hi my range rover 3.5 has just blown my air flow meter apart 3.5 flapper identified on the rpi web site. anyway i got a second hand one off ebay .but when it came it looks like the 3.5 flapper ,same electrical socket but larger inlet and outlet orifices and no mounting holes on the side 3 ,8mm tapped holes they are on the top 3 ,6mm tapped holes it is the same size and shape but has these differences . It wont fit , what is it off .any help would be appreciated . on the side is LRV133 0280203005

ChrisJC · Post by **ChrisJC** » Fri Aug 31, 2007 6:57 am

If the inlet / outlet orifices are too big, it's most likely a Jaguar flapper, which as you observe is different! Even if you manage to physically connect it, the calibration is wrong, so it's only any use if you use a mappable ECU.

Best you purchase another one.

Chris.

dirk · Post by **dirk** » Fri Aug 31, 2007 3:34 pm

thanks , I had to do a fair bit of ringing round but it is off a jag

Ace · Post by **Ace** » Sun Nov 08, 2009 9:05 pm

Hi Dirk.
If you still have the air flow meter 0280203005
How much would you want for it?