P6 3500. Inlet manifold gaskets, thermostat and gaskets
Moderator: phpBB2 - Administrators
-
- Helpful or Confused
- Posts: 88
- Joined: Sun Jul 22, 2007 11:51 am
P6 3500. Inlet manifold gaskets, thermostat and gaskets
Hi all, P6 engine runs strapped down on a trolley, but inlet manifold leaks coolant.
Recommendations please for good quality inlet manifold gaskets, thermostat, thermostat housing gasket, coolant temperature sensors and the two short hoses on the inlet manifold
Recommendations please for good quality inlet manifold gaskets, thermostat, thermostat housing gasket, coolant temperature sensors and the two short hoses on the inlet manifold
Composite inlet gasket,use a little gasket sealer around the waterways,and on the end rubber seals.Other gaskets just use a good quality of eGay,the two small hose I used some short silicone
The inlet can be tricky,but perseverance we win the day !
I use a bit of sealer on the thermostat gasket too,
Others may tell you different,but that's how I seal it
The inlet can be tricky,but perseverance we win the day !
I use a bit of sealer on the thermostat gasket too,
Others may tell you different,but that's how I seal it
-
- Helpful or Confused
- Posts: 88
- Joined: Sun Jul 22, 2007 11:51 am
-
- Helpful or Confused
- Posts: 88
- Joined: Sun Jul 22, 2007 11:51 am
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am
-
- Helpful or Confused
- Posts: 88
- Joined: Sun Jul 22, 2007 11:51 am
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am