Serp engine without air con

shanecl · Post by **shanecl** » Wed Jun 08, 2016 1:25 pm

Guy's

The serp engine I have has air con and I want to remove it but not be left with the horrible bracket, does anyone know where I could get the bracket to tidy up the engine.

tonio7# · Post by **tonio7#** » Wed Jun 08, 2016 6:45 pm

hi, sorry, french guy

I have a 4.6l with serpentine 3.9

I have a 300tdi pulley "tension" with a more short belt

avantage, iron pulley , it don't affraid hot and don't melt

belt ERR6191

richardpope50 · Post by **richardpope50** » Mon Jun 13, 2016 5:20 pm

shanecl wrote:Guy's

The serp engine I have has air con and I want to remove it but not be left with the horrible bracket, does anyone know where I could get the bracket to tidy up the engine.

Make one? I just did but if you can't weld cut the metal yourself and get a local company to weld it for you. I fitted a sprung idler wheel from my original donor to my home made bracket.

shanecl · Post by **shanecl** » Mon Jun 13, 2016 7:21 pm

Not a bad idea. Could you stick up a photo of your just to give me a starting point.

richardpope50 · Post by **richardpope50** » Wed Jun 15, 2016 5:44 pm

shanecl · Post by **shanecl** » Thu Jun 16, 2016 11:27 am

That's tasty and great idea. Will fab up one. Thanks Richard

richardpope50 · Post by **richardpope50** » Fri Jun 17, 2016 3:10 pm

Sorry the paint does not look too good but I had to slightly alter it the other week and the paint was too thick and it shows. Now on a 'to do' list!

My welding was not too good either still the public don't look there!

shanecl · Post by **shanecl** » Fri Jul 01, 2016 6:15 pm

I was in a mad panic to get the build finished so I chopped up the P38 bracket. I cut along a rib and then buffed the cut roundy. It actually cam out pretty well after a lick of paint.

The V8 Owners Forum -

Serp engine without air con

Serp engine without air con

Re: Serp engine without air con