The V8 Owners Forum -

Raybestos Z-Pack? I have around 200 psi line pressure for high load 2-3 changes. Yep, pretty sure it had the sonnax pump in there when they went too. It was in my 68 Camaro so I guess it's a lot heavier than yours. Did 30 odd thousand miles in it of mostly motorway so it had a lot of 6000rpm change...

Ah. I have an early one or a late 4L60e that I can stick behind my 2002 6 litre LQ4, can't update the internals to run it all of the stock computer it seems. Bit concerned how a 4L60e will hold up as I've killed the 3/4 bands on 3 of them now, and it's not going to like a twin turbo setup (yes, I'm...

Ah. I have an early one or a late 4L60e that I can stick behind my 2002 6 litre LQ4, can't update the internals to run it all of the stock computer it seems. Bit concerned how a 4L60e will hold up as I've killed the 3/4 bands on 3 of them now, and it's not going to like a twin turbo setup (yes, I'm ...

Sorry to hijack this thread, but any ideas where I can get a late 4L80 in the UK Eliot?

It'll be cheaper to do it yourself if you order enough bits, you can get £ for $ from UK suppliers on most bits.

Maybe, but the old megashifter I had was a 3 speed only one, and the Bandit I had to get a gate plate for

http://www.summitracing.com/search/?key ... ates&dds=1

Eliot wrote:I dont recall changing anything (apart from the plastic thing with R1234 on it) when going from TH350 to 700R4.

You can get away with it but the detents aren't quite in the right place.

Eliot wrote:B&M Ratchet shifter (megashifter) will work with that.
Most of the GM boxes use the same patten. So TH350,400, TH700R4, 4L60 and 4L80 use the same shifter.

Different plates on the shifter for the 700R4/4L80/4L60 to a TH350/400 so make sure you get the right plate

Good chance, it came out of a 4wd but the chap is supplying a rear casing from a 2wd? It has a sticker with 9KCD on it? As for the loom, a hand would be great, how involved was it? And excuse my ignorance but you mention a "truck throttle body with a cable than mess about with the fly by wire&...

If you want to sell the cast manifolds, let me know I'm after a pair. Also that looks like a 4L80-E gearbox on the back with half a transfer box? If you want a Corvette 4L60-E instead give me a shout. Just done the factory loom on mine (2002 LQ4) so if you need a hand I'm more than happy to help. It...