Page 1 of 1
Rover water pump pully size?
Posted: Fri Oct 14, 2011 4:28 pm
by Jono FD3
Hi guys, couls someone tell me the diamiter of the waterpump pully on the rover lumps (not the serpentine type)
I'm having a bit of bother finding one, and the new ones are about £50 so I had a thought of spinning up an aloy one on the lathe as the material can be had for sencible money!
Cheers
Jono
Re: Rover water pump pully size?
Posted: Fri Oct 14, 2011 6:11 pm
by DEVONMAN
Jono FD3 wrote:Hi guys, couls someone tell me the diamiter of the waterpump pully on the rover lumps (not the serpentine type)
I'm having a bit of bother finding one, and the new ones are about £50 so I had a thought of spinning up an aloy one on the lathe as the material can be had for sencible money!
Cheers
Jono
My alloy one is 175mm diameter. It's fitted to a p5/p6 type pump.
Cheers Denis
Posted: Fri Oct 14, 2011 6:36 pm
by Jono FD3
is that the type that is secured by 3 bolts close to the pump housing with a fan bolted to the end with 4 bolts?
Cheers
Jono
Re: Rover water pump pully size?
Posted: Fri Oct 14, 2011 6:36 pm
by DaveEFI
Jono FD3 wrote:Hi guys, couls someone tell me the diamiter of the waterpump pully on the rover lumps (not the serpentine type)
I'm having a bit of bother finding one, and the new ones are about £50 so I had a thought of spinning up an aloy one on the lathe as the material can be had for sencible money!
Cheers
Jono
It rather depends on the water pump you're using. There are two listed for the SD1 - one NLA, the other about 25 quid from Rimmer. I'd guess Landie ones are cheaper.
Posted: Fri Oct 14, 2011 7:01 pm
by DEVONMAN
Jono FD3 wrote:is that the type that is secured by 3 bolts close to the pump housing with a fan bolted to the end with 4 bolts?
Cheers
Jono
Yes, P5/P6 type. The pulley is amost a flat plate.
It's not the SD1 type with a viscous fan.
SD1 pulleys are dished shape.
Posted: Fri Oct 14, 2011 8:31 pm
by ian.stewart
if you want a P5/6 pulley, I have one kicking about, if i can find it, £10 posted,
Posted: Sat Oct 15, 2011 12:21 pm
by Jono FD3
ooooo, that would save me some time
Any chance of a pic and measurments of the centre hole just to make sure it's the right one???
Cheers
Jono
Posted: Sat Oct 15, 2011 2:19 pm
by ian.stewart
pictures are a problem, as I am in the process of moving house, everything useful is packed like my camera, and other helpful things, but if you pm me your mobile number I may be able to send you one
Posted: Sat Oct 15, 2011 2:52 pm
by ian.stewart
some aprox dimensions, Outside dia is about 6.75", bore is about 3.675. and there are 3 bolt holes on about 4,25 pitch
Posted: Sat Oct 15, 2011 4:28 pm
by Jono FD3
Cool, cheers matey!
I'll PM you my mob in a mo, and I'll have a measure of my water pump tomoz as it is up the farm
Cheers
Jono