The V8 Owners Forum -

Posted: **Fri Jul 10, 2009 4:18 pm**

Right.
im using the bosch 044 motorsport fuel pump,
should it have a non return valve in the outlet end?
as i have just started to run the fuel lines under the car and have the -6 x m12 adaptor if i remove the banjo fitting to fit this adaptor to run the braided i will loose the so called non return valve that is fitted to the 2.8 capri bosch pumps, (in the banjo fitting housing)

No doubt Stevie T will answer this one

Posted: **Fri Jul 10, 2009 6:36 pm**

you do not need a non return valve.

Posted: **Fri Jul 10, 2009 10:03 pm**

cheers mate so remove the banjo fitting and the built in non return and screw the m12x-6 fitting in
schwwwwweeeeeet

Posted: **Fri Jul 10, 2009 10:10 pm**

its as easy as that, yes.

Although I retained the steel section that bolts into the pump itself. The Alu fitting couldnt be screwed diretly into the pump

Posted: **Fri Jul 10, 2009 10:20 pm**

ta stevie