Page 1 of 1
what's the difference
Posted: Tue Dec 02, 2008 9:20 pm
by K4000JB
hi guys just wondering if anyone knows if there is any differences between the flapper injectors and the hotwire ones ,apart from the different fittings , e.g. coil resistances, flow rates, flow patterns?
cheers
ant
Posted: Tue Dec 02, 2008 10:43 pm
by katanaman
just about everything is different. The end that goes in the manifold is a different size. Flapper injectors are low impedance where hotwire are high impedance and the flapper injectors don't flow as much as 3.9 hotwire ones. Basically they aren't interchangeable at all.
Posted: Wed Dec 03, 2008 5:24 pm
by chodjinn
Walk away from the Flapper, walk away from the Flapper . . . !!!!
Posted: Wed Dec 03, 2008 8:23 pm
by K4000JB
thanks for the replies i only ask because i was going to try something a bit different. you have answered my questions i thank you
Posted: Sat Dec 06, 2008 6:06 pm
by K4000JB
sorry to bring this back to the top
can anyone tell me at what pressure the flapper injectors run, what type of spray pattern they deliver and what is the maximum flow rate
thanks in advance
Posted: Sat Dec 06, 2008 7:03 pm
by ChrisJC
They run at 35psi at full throttle.
Not sure about the other two questions.
Chris.