Page 1 of 1
con-rod bolts
Posted: Thu Jul 10, 2008 10:48 am
by need4speed
can the con-rod bolts from the 4.0/4.6 be reused, or must they be replaced....
different people have been telling me different things.
Posted: Thu Jul 10, 2008 11:15 am
by RoverP6B
It is my understanding that the only bolts used on the Rover V8 4.0 and 4.6 that MUST NOT be used more than once are the factory standard stretch (Torque to yield) bolts used for head retention.
All other bolts are high tensile, ie grade 8 or higher, and as such may be used more than once without detriment. Of course, if the bolt has been damaged in some way, then replacement would be advised.
Ron.
Posted: Thu Jul 10, 2008 12:32 pm
by need4speed
yippee..that saves a few beer tokens...
Posted: Thu Jul 10, 2008 9:14 pm
by ppyvabw
If you're giving it some big licks, the arp rod bolts are a good investement, but just for standard the old ones can be re-used