The V8 Owners Forum -

Been offline a while as been busy rebuildin me chev, heres the pics:

Looking very smart there... Have you put any 'fast' parts in?

Had it bored 40 thou over and fitted hypertectic pistons, decked the block to zero and removed 20 thou from the heads 2 get cr up, the cam ic ouldnt find out any info on, what brand it was etc, measured the lift 2 be 485 thou at the valves, duration i have no idea. It had a sorta lumpy idle before so is a warmish cam. Is fitted with a 750 vac holley but mainly runs lpg. No real fast parts as it lives in a 4wd, which needs ther torque( especially when its gettin nailed in the sand dunes or on the beach. Fire it up moro mornin, will let u know how it goes.

oh and an edlebrock intake manifold too

Nice ... good luck for tomorrow!