Bell housing cover
Posted: Thu Apr 19, 2007 3:15 pm
RV8 - 2WD bell housing. Whats the cover at the bottom between the sump and the bell housing called? Where can I get one from?
The V8 Owners Forum -
Welcome to the well-known V8 Owners Forum, no matter what you drive if its V8 Powered you'll be made very welcome.
https://www.v8forum.co.uk/forum/
Bell housing cover
Page 1 of 1
Posted: Thu Apr 19, 2007 3:31 pm
Ebay ? where i had mine from, but u got to check it's the right one, flywheel cover? torque convertor cover? just pt in rover v and trawel !! john
Posted: Thu Apr 19, 2007 3:45 pm
first thing I did actually and when I failed to find I was wondering what it was called.
JSF55 wrote:Ebay ? where i had mine from, but u got to check it's the right one, flywheel cover? torque convertor cover? just pt in rover v and trawel !! john
Posted: Thu Apr 19, 2007 5:57 pm
Posted: Thu Apr 19, 2007 6:10 pm
Don't buy either of those unless you have an auto - they won't fit. The aluminiun ones are for autos ONLY. You need a steel one - FRC142 £20 ish from Rimmers (Adams favourite shop!).
The fixing bolts are M6 if I remember correctly.
Russ
The fixing bolts are M6 if I remember correctly.
Russ
Posted: Thu Apr 19, 2007 7:35 pm
Yep, looked at that one and knew it wouldn't fit as no hole for the clutch is a giveaway.
Thanks Russell. Rimmers, noooo. I shall have to say FRC142 and no substitute!
Thanks Russell. Rimmers, noooo. I shall have to say FRC142 and no substitute!
russell_ram wrote:Don't buy either of those unless you have an auto - they won't fit. The aluminiun ones are for autos ONLY. You need a steel one - FRC142 £20 ish from Rimmers (Adams favourite shop!).
The fixing bolts are M6 if I remember correctly.
Russ