Low voltage at pin 39 TVR 4.0

General Chat About Electrics, And Ignition Systems.

Moderator: phpBB2 - Administrators

Post Reply
User avatar
bodger
Guru
Guru
Posts: 870
Joined: Sun Feb 11, 2007 7:37 pm
Location: dartford area

Post by bodger »

is Pin 39 the one that also does the vacuum over run cutout ? ... or is that the early engines only ... i threw mine away years ago so i can't remember which wire it was now .:)
Dave :)


remember it's only a bodge if it DOSN'T worK
Top
User avatar
richardpope50
Gold Member
Gold Member
Posts: 616
Joined: Thu Jan 28, 2010 12:25 pm
Location: Horsham, West Sussex

Post by richardpope50 »

According to my TVR Griffiths (hotwire) manual wiring diagram it only goes to the coil's 12v -ve treminal. There is no other connection. Also when I stripped down my loom this was the only connevtion I had in my loom. PM me if you want my EFI loom / ECU details - I also have the LandRover ECU test manual.
Richard.
Dax Rush 5.0l TVR V8, EFI with Megasquirt ECU and wasted spark, Racelogic Traction Control and Quaife LSD ....... Now nut and bolt restoring a TR6
Top
Post Reply

Return to “Electrical & Ignition Area”