Page 2 of 2
Posted: Sun Mar 16, 2008 10:45 am
by Coops
Hi Allan,
any more news on this mate,
told you you would get a lot of interest from the forum alone,
i have a list im getting together for bends etc i need for my system.
and wondered what the results were so far regarding the new machine?
Posted: Sun Mar 16, 2008 12:47 pm
by dnb
I badly want a set of GT40 style crossover manifolds for the Griff. A prototype has been made by a friend and it works extremely well, but it's too much fiddle to make a production run the way these were made!
pipe bending
Posted: Wed Mar 19, 2008 7:52 pm
by fordy
Rossco, YHM.
Posted: Wed Mar 19, 2008 9:00 pm
by dnb
Knew you'd find your way here eventually Clive!
Posted: Wed Mar 19, 2008 9:59 pm
by Rossco
So far so good
The machine is here and we are getting to grips with it.
Enquiries off this forum alone are very encouraging.
Posted: Thu Mar 20, 2008 12:24 am
by HairbearTE
Just out of interest which machine have you bought? Do you reckon you can bend Chrome moly tubing 2"x.080" for example?
Exhaust manifolds
Posted: Sun Apr 06, 2008 3:29 pm
by gbtv8
Hi, I am a recent member and have been looking for a set of manifolds to fit my currenr project so I am really interested in your possible aquisition.
Colin.
Posted: Mon Apr 07, 2008 10:23 am
by Ralphh85
i can waterjet cut flanges very cheap if it helps, an have stainless here to.
can your machine ake the end of a pipe bigger so that a puipe the same size can slide inside it?
price dependent i might also want some pipe bending.
Ralph
Posted: Wed Apr 23, 2008 11:18 am
by 5000SE
In a few months I'll be wanting to make up a system to run from 2.25" collectors to a 3 or 3.25" main pipe, then split into 2.25 or 2.5" tailpipes.
Would you be able to produce the bends I need from cardboard templates or sketches?
Posted: Tue Apr 29, 2008 6:26 pm
by chodjinn
no one heard from rossco yet then?!
Posted: Tue Apr 29, 2008 7:20 pm
by katanaman
chodjinn wrote:no one heard from rossco yet then?!
He has explained in another post what is going on.
Posted: Fri May 02, 2008 7:40 pm
by 3500SE
Given my 'ongoing' problems with a purchase from Rossco I would suggest a secure method of payment.. 'paypal'
Managed to get down the bank OK....and still advertising
Posted: Mon May 05, 2008 5:01 pm
by Rossco
I owe the forum an apology.
I don't want to go into detail but we lost a member of our immediate family last month and so things are not good for us at the moment.
For those waiting to hear about exhaust bits etc I can't make any promises at the moment.
Scott, your dizzy is on it's way to you as per our last emails.
I know the forum will understand