A couple of months back my offside manifold started to blow, so i bought the gaskets to do the job. Upon starting i found two bolts missing & the remaining bolts loose, so bought some replacement bolts.
Well, recently i experienced the same blowing only to find all the bolts were loose again. All were torqued up on original rebuild. Question is can i use stud retainer in these extreme heats?
Discovery 3.9 exhaust bolts loose
Moderator: phpBB2 - Administrators
-
oilyfingers
- Helpful or Confused
- Posts: 68
- Joined: Sun Sep 28, 2008 9:30 pm
- Location: kent
