PPC top ten engines of all time..

Day To Day Chat Area, So Forum Topic's Don't Get Spammed Up.

Moderator: phpBB2 - Administrators

User avatar
HairbearTE
Guru
Guru
Posts: 870
Joined: Sat Nov 18, 2006 12:27 am
Location: Melton Mowbray

PPC top ten engines of all time..

Post by HairbearTE »

1. Small block chevy
2. Alfa twincam
3. Mazda rotary
4. Bentley 4.5 litre
5. Ford crossflow
6. VW flat four
7. Chrysler Hemi
8. VAG 1.8T
9. Jaguar V12 :shock:
10. Subaru flat four.

Hmm.. think the mail bag will be full in the ppc office this month.


Image
bill shurvinton
Getting There
Getting There
Posts: 188
Joined: Sat Nov 18, 2006 4:45 pm

Post by bill shurvinton »

Can't argue with 1,2,3,4,5 and 9.

I would prefer the flat 6 to the flat 4 from the pen of porsche, and never been a hemi fan. 8 and 10 are dubious.

At the end of the day, when V8s are talked about, the Buick 215 just doens't count compared to the mainstream yank stuff. We all love it, but that doesn't change its position in history. Chevy make more small blocks in a year than rover did ever.

So its a top 20, not a top 10.
User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2459
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Post by Ian Anderson »

1500cc BRM 16 Cylinder Formula 1

Hell the even made a record of the noise it made

Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.
ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Post by ian.stewart »

Flathead V8,
Cosworth DFV/DFX
Cosworth BDA, spawned an auful lot of 16v copies,
Merlin v12.
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
User avatar
HairbearTE
Guru
Guru
Posts: 870
Joined: Sat Nov 18, 2006 12:27 am
Location: Melton Mowbray

Post by HairbearTE »

The Jag V12 is the worlds first aluminium boat anchor and putting it an the e-type was close to treason imo. The Jag six would be more deserving of a top ten position. I'm also not sure that there were only two engines ever that are better than the Mazda! It's a wankel engine, clever design yes, but 3rd best engine ever? The Audi is a cracking little unit but has it earned a place in this list yet? The scooby performs as well as most engines that have been tuned to that level. No V6's at all in the top ten and some would argue a good case for the old ferrari V12. The chevy LSx engine has shown there's life in pushrods yet and deserve recognition. Ford DFV is another nice piece that springs to mind. It's all about opinions of course. It'd be interesting to see how the list would look if it were a readers poll. Makes for a good debate though eh?
Image
bill shurvinton
Getting There
Getting There
Posts: 188
Joined: Sat Nov 18, 2006 4:45 pm

Post by bill shurvinton »

But without the Xflow there would have been no twincam and without the twincam there would have been no BD and therefore no DFV. Therefore the Xflow is the greatest engine ever.

Jag V12 in E-type was wrong, but the engine is still great. Very few engines are as smooth and refined. At its best in the daimler double 6 IMO. You hear the starter and see a puff of smoke, but the only way you can tell the engine is running is when it pulls away. Superb.

He he, fights could start over this thread :-)
User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5079
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

Well I think the RV8 should have been there. It was in production for a very long time, went into a lot of vehicles, and is a popular choice for persons like ourselves.

It might not be perfect (not many engines are), but that doesn't matter. Otherwise the Lexus engine should be in the list and lots of other Toyota engines that just work.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
User avatar
HairbearTE
Guru
Guru
Posts: 870
Joined: Sat Nov 18, 2006 12:27 am
Location: Melton Mowbray

Post by HairbearTE »

I must admit I was surprised at the omission of the old RV8. In truth it probably dosen't deserve to be in the top ten on any single innovation or achievement but its loyal service to car modders in this country for the last 30 or so years could have been taken into account. I've emailed a very tongue-in-cheek letter to Will about this and he responded by saying the rover wouldn't be in the top 100! :lol:
Image
bill shurvinton
Getting There
Getting There
Posts: 188
Joined: Sat Nov 18, 2006 4:45 pm

Post by bill shurvinton »

One thing I did remember in the bath last night was of course the 2 F1 world championships of the repco brabham. OK the only but they used was the block, but still a laurel.

Of course by that argument the BMW 318 engine should have been there as the basis for the TAG turbo F1 engine. 1500ish HP from 1.5 litres for a lap (if you were lucky) is pretty good going by any standards.
kev_the_mole
Forum Contributor
Forum Contributor
Posts: 1022
Joined: Sat Nov 18, 2006 9:41 pm
Location: Las Islas Purbequias

Post by kev_the_mole »

Perhaps they should have put 'PPC top ten best loved engines of all time'?
Last edited by kev_the_mole on Tue Jun 26, 2007 3:33 pm, edited 1 time in total.
Image


It's an engine Jim.....but not as we know it ;)
ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Post by ian.stewart »

bill shurvinton wrote:But without the Xflow there would have been no twincam and without the twincam there would have been no BD and therefore no DFV. Therefore the Xflow is the greatest engine ever.

Jag V12 in E-type was wrong, but the engine is still great. Very few engines are as smooth and refined. At its best in the daimler double 6 IMO. You hear the starter and see a puff of smoke, but the only way you can tell the engine is running is when it pulls away. Superb.

He he, fights could start over this thread :-)
If we follow that logic, then the Crossflow should not be there it should be Pre X flow :D
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5079
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

I think it would be more accurate to have titled it '10 engines that Will Holman likes'.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
bill shurvinton
Getting There
Getting There
Posts: 188
Joined: Sat Nov 18, 2006 4:45 pm

Post by bill shurvinton »

ian.stewart wrote:
If we follow that logic, then the Crossflow should not be there it should be Pre X flow :D
Pedantically yes. And I have a couple of pre-Xflow heads in the garage...
kev_the_mole
Forum Contributor
Forum Contributor
Posts: 1022
Joined: Sat Nov 18, 2006 9:41 pm
Location: Las Islas Purbequias

Post by kev_the_mole »

I think it would be more accurate to have titled it '10 engines that Will Holman likes'.
...surely then he would have fitted a chevy, not a ford, to his capri :?:

Anyway I won't hear a bad word about the nice Mr. Holman who showed great concern about my misdirected PPC magazines when I told him about the problem at the Festival of Speed and even followed up with a phone call on Monday to make sure of my 'new' (20 months ago) address :roll:

That is unless the next mag does not turn up and I'll be slagging him off with the rest of you! :lol: :lol: :lol:
Image


It's an engine Jim.....but not as we know it ;)
JC.
Getting There
Getting There
Posts: 249
Joined: Mon Nov 20, 2006 5:16 am
Location: Alfreton, Derbyshire
Contact:

Post by JC. »

A series?
B series?
Jaguar XK
Aston Martin marrek designed V8.... his 6 cylinder engine is my favorite engine.
Image -JC.
Post Reply

Return to “General Chat Area”