short waterpump

Wee_chris · Post by **Wee_chris** » Fri Jan 05, 2007 10:35 am

Hi Kadettv8,

are you going to take the stuff from ebay, if not I will, thought I would be a gentleman and let you have first chance.

http://cgi.ebay.co.uk/MGB-Rover-V8-Shor ... 0073839829

Cheers

Chris

Post by **katanaman** » Fri Jan 05, 2007 3:35 pm

thats nothing like my p6 crank pulley. my one has the V for the belt cut into the damper itself and not bolted on steel pulleys although it did have one bolted onto the front of it. I think those parts are mixed up with later parts

KadettV8 · Post by **KadettV8** » Fri Jan 05, 2007 4:56 pm

Spittie_v8 wrote:Hi Kadettv8,

are you going to take the stuff from ebay, if not I will, thought I would be a gentleman and let you have first chance.

http://cgi.ebay.co.uk/MGB-Rover-V8-Shor ... 0073839829

Cheers

Chris

you can buy it. i don't need it jet. i need it in a couple of month's. first i have to put the engine in right.
but thanks for asking.

Mark · Post by **Mark** » Mon Jan 08, 2007 10:38 pm

I had a P6 front pully but threw it away because the rubber part that holds the damper ring on was perished due to age. I just machined a 'V' groove into the SD1 pully as it was in much better condition, any engineer with a lathe could do this for £20.

Mark