What Water Pump Is This

General Chat About Cooling & Overheating

Moderator: phpBB2 - Administrators

Post Reply
nokia_aid
Forum Contributor
Forum Contributor
Posts: 72
Joined: Tue Dec 12, 2006 7:20 pm

What Water Pump Is This

Post by nokia_aid »

What Water Pump Is This i ordered a rover v8 pump off ebay but the pulley is in the wrong place, anyone tell me what one i need to order


Image

Image



User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5041
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

Not sure exactly what you are asking, but that looks like a '4x4' pump to me, i.e. off a Range Rover.
The pulley is removable.

I don't know how many different actual pumps there are though.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8

DEVONMAN
Top Dog
Top Dog
Posts: 1440
Joined: Sat Dec 13, 2008 2:46 pm
Location: Croydon UK

Post by DEVONMAN »

You need to say which timing cover you have as this will determine the type of pump you need.
As ChrisJC stated, the photo is of an early range rover (4 wheel drive) which has the pump high up to get the fan out of water etc when off roading.
P5/P6 and SD1 pumps are set lower and then the later pumps with serp drive belts are roughly in the same location but run counterclockwise.
1950 A40 Devon Hotrod with 5.0 twin turbo RV8.
EDIS8 wasted spark, Holley Injection.
Been as far as the Moon and back in 57 years of driving. Same Car, 5 engine upgrades !!!


Image

nokia_aid
Forum Contributor
Forum Contributor
Posts: 72
Joined: Tue Dec 12, 2006 7:20 pm

Post by nokia_aid »

it came out of a snatch land rover, but not sure what timing cover it would be

User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5041
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

So you are saying that the new pump won't fit the timing cover? If that is the case, then you have a 'car' pump, and need the appropriate '4x4' pump. All the '4x4' pumps will fit that timing cover, but there are variations in the shaft over the years.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8

nokia_aid
Forum Contributor
Forum Contributor
Posts: 72
Joined: Tue Dec 12, 2006 7:20 pm

Post by nokia_aid »

no the pump fits the timing cover but the pulley is in the wrong place,

User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5041
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

Rimmers list just about all the variations....!:
http://www.rimmerbros.co.uk/Item--i-GRID800036

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8

Post Reply

Return to “Cooling Area”