MGB Lowered Leaf Springs

mgbv8 · Post by **mgbv8** » Fri Jan 25, 2008 6:53 pm

Dave
I might need one. But I cant remember now?

Mine doesnt have one, and I didnt fit one due to the snap oversteer issue.
Bolt it to the wall in the garage. It will make a nice strong hanging rail eh?

tetlow · Post by **tetlow** » Fri Jan 25, 2008 7:00 pm

Perry

This bar realy is a piece of s%*t.

The geometry is not right and the bushes are all twisted to hell when under load.

I am not surprised that one of the hex vertical rods broke. (now M8 threaded rod)

If your serious I will put it aside.

Dave

davemgb · Post by **davemgb** » Fri Jan 25, 2008 7:18 pm

Dave,

I would wait until you drive it a little and see if it settles - I've not know Doug to be wrong.

First time I put new rear springs on a Midget it sat so high you couldn't connect the drop straps, little bit of use and it all settled down.

Dave

tetlow · Post by **tetlow** » Fri Jan 25, 2008 7:25 pm

Dave

Doug's springs are still under my pillow. I should fit them in the next week or so.

I am sure they will work fine.

Its the poxy ARB that I have removed.

Dave

mgbv8 · Post by **mgbv8** » Fri Jan 25, 2008 7:27 pm

I dont need it Dave Ta.